ECO Products

tongue and groove flooring fir c and better

Clear Fir, Jones Wholesale Lumber

Clear Douglas Fir Products | Stock Clear Douglas Fir Patterns Pattern Stock- C and Better Vertical Grain. Tongue and Groove, S2S and CM 1/4" T and G Flooring

Douglas Fir - Sierra Pacific Industries

This wood is used in the manufacturing of more products than any other C and BTR. or Export Grades - Kiln Dried, Rough, Full Sawn, Vertical Grain or Flat Grain Dry S4S 1x4 C and Btr Vertical Grain T and G Flooring 1x6 C and Btr Vertical Grain S4S

Structural Lumber Overview - Western Wood Products Association

Douglas Fir, Ponderosa Pine, White Fir and Western Red Cedar are the most Structural Joists and Planks grades are products that are 5 inches or greater in width. as floor joists, rafters, headers, small beams, trusses and general framing. Finger-Jointed lumber makes efficient use of available wood resources and can

Wood - Bob Vila

Think about the beating your wood floors endure on a daily basis: high heels, pet What's the best paint for wood—water- or oil-based? .. out the careful herringbone floor installation in the library that is nearly c. .. 4x10 douglas fir floor joists, and also put in 2 x 6 spruce tongue-and-groove decking on the second floor.

Doug Fir | Boston Cedar

Common uses for Douglas Fir lumber include fir flooring, fir timbers, fir beams, While C and Better is a very acceptable grade, B and Better by grade rule has a more uniform color and a much tighter grain pattern. 1×4 Tongue and Groove Flooring.

Products Catalog - Dunn Lumber

Results 1 - 12 C-Deck. Cable Rail System . Camo . CertainTeed. Champion .. douglas fir. fir . tongue and groove floor cleaner .. Click 'More' for tally

Pseudotsuga menziesii - Softwood Export Council

Western Wood Products. Association scapes often accounting for 90% or more of the trees in an . in the design of floors and other hori- zontal systems. . C and BTR. D. These grades reflect clear and nearly clear Douglas fir timber products.

OILP Oregon Industrial Lumber Products, Inc.

We specialize in high end kiln dried Douglas Fir and Yellow Cedar lumber. We carry an inventory of S4S boards, flooring, rough stock, timbers, and industrial clears. We can also run custom sizes, Tongue and Groove, end match, and Specializing in C and Better Clears under the Finish and Industrial Clears grade rules.

Lumber Nomenclature and Definitions | Neiman Reed Lumber

The best grade is A, the lowest D. Most thicknesses of plywood, when laid up, contain African Mahogany A reddish brown, moderately soft wood used in cabinets, Alpine Fir Sometimes referred to as Subalpine Fir, it is a species included in C-Plugged A C-grade panel face or back that has been patched where there

DOUGLAS FIR C-SELECT VERTICAL GRAIN | Pioneer Millworks

Our C-Select Douglas Fir Vertical Grain features dense grain in a consistent linear pattern. Contact my local wood designer Flooring; Solid Reclaimed Paneling; Engineered Reclaimed Flooring; Reclaimed Wear Layers; Reclaimed Timbers to ensure a better future, Pioneer Millworks operates on the triple bottom line.

Wood Flooring | Fingerle Lumber

Wood Flooring. Douglas Fir Flooring. Douglas Fir flooring. C and Better grade. Vertical grain. No knots. Unfinished. Top quality porch or interior flooring. Also used

Lumber Product Line | Lumber Boards, Lengths, Studs

Ponderosa Pine is easier to stain, but Spruce accepts a pattern more readily. Western SPF | Hem Fir | White Fir | Douglas Fir | Southern Yellow Pine Dimension lumber is most commonly used to frame walls, floors and roofs. . By gluing a number of thin veneers or plies of softwood or hardwood, the first engineered

Clear Vertical Grain (CVG) Douglas Fir Flooring

CVG Douglas Fir Flooring is offered in both 3 1/8" and the hard to find 3 1/4". We also Fir Flooring. If you're a wood lover, you know the difference between tight clear vertical grain and loose clear vertical grain. Look no more. Our 3 1/8"

Tinsman Brothers Lumber - Lumber

5/8X4 Fir Ceiling T and G "C", 5/4X12 Fir Step C-VG. 1X6 Fir 1X6 Fir Novelty Siding "C", 5/8 X 6 Fir Fence T and G "C: Flooring. 1X4 Flooring T and G "B and Better-VG"

Trestlewood II Salty Fir C-S/S-P Flooring

Trestlewood II Circle-Sawn/Skip-Planed Flooring is produced by taking circle-sawn boards, running Profile, Tongue and Groove (T and G) 3/4"; b) Width: 3", 5" and 7"; and c) Length: 2 to 10' with no more than 5% of total footage shorter than 6'.